Russian customers need to pay attention to:
If you choose to ship from a Russian warehouse, you can only choose 5 colors. If you need other colors, please choose to ship from China and contact the seller.
IMPORTANT NOTICE: We provide various sensors colors for your choice, in your purchase, please tell us the color to the sensors If you need some special colours for the sensors, please send us the NAME OF YOUR CHOSEN COLOURS while confirming order, then we'll try to select the closest colours for you since we have more than 60 different colours ready. Otherwise you can choose white sensors, and paint them to the matching finish of your car1:Front Sensor Detection Range:0.98~3.28 ft Rear Sensor Detection Range: 0.98~7.54 ft2:Digital LCD display (number & light). Help to provide increased safety for passengers, pedestrians and family members who happen to be around the moving vehicleSpecifications:1:Rate voltage: 12V DC 2:Rate current: 100mA - 300mA3:Ultrasonic frequency: 40KHz4:Control moudle working temperature: -30 - 80 celcius degree5:Display working temperature: -20 - 70 celcius degree6:Sensor diameter: 22mm7:Installation mode: DrillingSound: Heart beat type, more recent alarm more rapidlNotes: Please allow 1-3mm（cm） differs due to manual measurement.Due to the different monitor and lights, the pictures may not show the actual color of the item. Thanks for your understanding.
The standard installation height of the sensor
it is recommended not to be lower than the standard height, otherwise the parking sensor system will use the ground as an obstacle
1: Display X12: Control unit X13: Sensor X84: Drill X15: Manual X16: Sticker X17: Power cord X18: Sensor cable extension line X4
Can I install the product immediately after receiving it?
It is recommended that you test the product before installing
How to test the equipment?
1 You need to prepare a 12V power supply with a current between 100mA and 300mA.2 Keep the sensor at a distance, pay attention to the distance between the sensor and the sensor and the distance between the ground3 The main power cord of the device is the white wire or the yellow wire instead of the red wire (the red wire is only an auxiliary wire, you don’t need to connect it), but the white wire and the yellow wire cannot be connected to the power supply at the same time. They work independently. The white wire provides power to EFGH Sensor, yellow wire provides power to ABCD sensor